Bellinzoni Stone Sealer IDEA HP

Bellinzoni Stone Sealer IDEA HP

Bellinzoni Stone Sealer IDEA HP is water and oil repellent for marble, granite, and other natural stones. It also provides protection to the surface from UV rays. It penetrates deeply into the stone, blocks efflorescence, and let the stone breaths without changing the natural properties of the stone. The innovative sealer is particularly made for unpolished stones like antique marble, bush-hammered, and flamed stones. Sometimes, these stones are being used as it as, means without polishing, which increases the chances of damaging their beauty due to moisture. Idea HP is the solution to this problem. You might also want to take a look at the other Sealers we carry.

Stone Sealer IDEA HP Main features

• A clear protective agent studied to protect stones against water, oil, grease, and humidity. IDEA HP penetrates deep into the stone, blocks the efflorescence, and lets the stone breaths, and does not change the natural color of the stone; does not create the unsightly plastic film.
• Laboratory test shows IDEA HP resists well to UV rays and the color does not change even after a prolonged time. IDEA HP is perfectly clear and leaves unaltered the original stone color. Most suitable for façade, table, kitchen, vanity tops, etc. It prevents mildew formation.

How to Use the Bellinzoni Idea HP Stone Sealer?

The surface must be clean and dry otherwise it will be harder to remove after protection. The application can be done by brush, by roller, or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the products to penetrate well into the stone. Application of product by brush, making pressure, will facilitate penetration into frames and cavities, It is also possible to apply it by airless spray gun, in this case, fill the tank with the product and spray at the distance of 20-25 cm. Let the product dry naturally and the stones will be protected. In case of excess of product, the same can be removed using cloth impregnated with Ideal HP.

Suggestion to use the Product

• It is suggested to apply the product until the complete saturation of the stone.
• On very absorbent material, it is better to make a second application after an hour from the first.
• Don’t dilute the product with any solvent or water, the formulation is ready to use.
• Material, before treatment, has to be completely dry.
• For small pieces of stone, it is possible to apply the product immersion. It is also possible to use a sponge completely damped with Idea HP and apply it evenly on the surface.
• Once the material has been treated, it is necessary to wait for 24 hours for complete polymerization.
• In case of treatment of statues, decoration, etc. pay attention to protect well cavities and corners.
• Read carefully recommendations printed on the tin before use.