K-Bond POLYESTER Buff Paste – Gloss Finish Adhesive

K-Bond POLYESTER Buff Paste – Gloss Finish Adhesive

K-Bond POLYESTER Buff Paste is a premium-quality polyester adhesive designed for stone fabricators and installers. It has been engineered to have the best working time to curing speed ratio. Uses include bonding, laminating, piece installation, and repairs.

POLYESTER Buff Paste – Gloss Finish Adhesive

• Pre-colored paste consistency polyester adhesive
• Glossy buff finish used mainly for polished stone
• Fast curing
• Used for seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods
• Good adhesion to natural stone up to 70 degrees C or 160 degrees F
• Resistant to water and oil

Buff Paste – Gloss Finish Adhesive Specifications

Category	Details
Consistency	Paste
Attributes	Buff color formulation for filling travertine and other buff-colored stone. Paste won t sag on vertical surfaces.
Working Time	5 to 7 minutes
Tack Free	10 to 30 minutes
Machinable	30 to 60 minutes
Usage Location	Interior
Recommended Application	Natural and engineered stone.
Recommended Use	Seams, edge repair, laminating stone, filling chips and reinforcement with metal and fiberglass rods.

Processing Conditions

• Make sure stone surfaces are clean of any substance and dry.
• Measure out the appropriate amount of polyester resin, then measure out the appropriate amount of hardener.
• Next carefully mix the components together. Be careful to scrape the sides and bottom of mixing cup to ensure thorough mixing.

• Do not “stir” product. This can trap air and cause bubbles.
• Overworking of product can cause the product to become thinner.
• Do not use once gelling has begun.

Safety Precautions

• Ensure good ventilation
• Wear gloves and safety glasses

For further information, please consult the Material Safety Data Sheet.

Packaging

Size	Sales Unit
Quart	6
Gallon	2
Imperial Gallon	4
Five Gallon Bucket	1

Product Related Documents

K-Bond POLYESTER Buff Paste – Gloss Finish Adhesive Spec Sheet