Surface Preparation
Surface Preparation Categories
Explore Brand PagesSurface Preparation
Showing 25–36 of 583 results
-
Diamond Tooling, Equipment & Instruments, Surface Preparation
CDC LaRue 7 in Resin Rings
- Designed for polishing concrete, terrazzo, and stone surfaces.
- Compatible with any 7-inch variable-speed angle grinder.
- Resin-bond construction.
- Available in eight grit options, ranging from 30 to 3500.
- Designed to deliver a high-gloss shine at a low cost.
-
Power Tools, Surface Preparation, Tools & Supplies
CDC LaRue HUM-B Concrete Grinder
- Patented Dust Grabber™ Technology: Combines integrated anti-suction-lock engineering with a 2-inch extraction port, eliminating suction lock and capturing up to 99% of airborne dust.
- Ergonomic Upright Design: Allows operators to stand comfortably, significantly reducing backaches, fatigue, and job-site injury risk.
- Gas-Filled Shocks: Absorb surface vibrations and maintain smooth, consistent grinding pressure.
- Flush-to-Wall Grinding: Tight edge clearance lets you prep close to baseboards, walls, and borders without secondary tooling.
-
Power Tools, Surface Preparation, Tools & Supplies
CS Unitec EBS 7 in Hand-Held Concrete Grinder
- Ergonomic H-Frame Dual Handles: Parallel grip design distributes operator pressure evenly across wide surfaces for pinpoint tracking and reduced fatigue.
- Abrasive-Isolated Motor Placement: Motor and power switch sit above the grinding zone and outside the cooling air stream, shielding critical components from destructive concrete dust.
- Integrated Edge-Grinding Shroud: Front edge flips open and front guard detaches quickly to grind flush against walls, baseboards, and into 90° corners.
- Height-Adjustable Brush Skirt: Floating brush ring adjusts downward to match diamond segment wear, maintaining a continuous vacuum seal.
-
Power Tools, Surface Preparation, Tools & Supplies
CS Unitec Mega Hippo Mixer with Dust Collection
- Single-Operator High Output: Mix, wheel, and pour up to 6 bags (23 gal / 350 lb capacity) without transferring material between containers.
- Controlled Easy-Tilt Pouring: Balanced pivot cradle and smooth-rolling trolley allow precise, simultaneous pouring and spreading straight onto the floor.
- OSHA-Compliant Dust Control: Canister lid with dedicated vacuum extraction port captures airborne silica and dust at the bag-drop point.
- High-Torque 2-Speed Motor: Heavy-duty 15 A geared motor provides dedicated low- and high-RPM settings suited to both dense slurries and flowable compounds.
-
Power Tools, Surface Preparation, Tools & Supplies
CS Unitec MortaMix Pelican Cart
- Full-Load Transport: Carries a complete PORTAMIX batch directly to the application area, eliminating the need to fill and carry separate containers.
- Controlled Dispensing: Features a quick-release tilt-lock mechanism for precise, clean, effortless material pouring.
- 360° Maneuverability: The large handle and heavy-duty casters enable effortless steering and smooth transport across jobsite surfaces.
- Sturdy Welded Frame: Heavy-duty welded construction engineered to support demanding loads and deliver long operational durability.
- Canister Included: Includes a dedicated 20-gallon canister for clean, efficient material handling.
-
Power Tools, Surface Preparation, Tools & Supplies
DeWalt 7 in Angle Grinder
- 4.7 hp maximum motor power
- Up to 8,500 RPM for material removal with 7″ grinding wheels
- Overload protection for higher operating speeds under load
- Dust Ejection System helps protect the motor from damaging particles
- Helps extend brush life by reducing abrasive particles entering the motor
- Anti-vibe trigger handle helps reduce vibration-related user fatigue
- Lightweight design stated at 11.6 lb
-
Diamond Tooling, Equipment & Instruments, Surface Preparation
Husqvarna 10 Segment Diamond Grinding Tools
Diamond Tooling, Equipment & Instruments, Surface PreparationHusqvarna 10 Segment Diamond Grinding Tools
- 10 hexagonal diamond segments designed for smoother, active grinding.
- Excellent service life during initial grinding on soft-to-medium concrete.
- Works wet or dry for flexible grinding workflows.
- Excellent scratch pattern for effective surface preparation.
- Multiple configurations to accommodate different grit, bond, and attachment requirements.
-
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface Preparation
Husqvarna DC1400 Dust Bags 5 Pack
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface PreparationHusqvarna DC1400 Dust Bags 5 Pack
- Replacement dust collection bags for Husqvarna Dust Collection Systems
- Designed for the Husqvarna DC 1400 Dust Collector
- 5-pack configuration
- Replacement bags for DC 5500 and DC 3300 available in boxes of 200
-
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface Preparation
Husqvarna DC3000 Replacement Filter
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface PreparationHusqvarna DC3000 Replacement Filter
- Replacement filters for Husqvarna Dust Collection Systems
- Replacement filtration options for the Husqvarna DC 1400
- Standard paper filter option for DC 1400
- HEPA filter option for DC 1400
- Primary filter (filter sock) for DC 5500
- Secondary polyester filter/micro filter for DC 5500
- DC3300 Primary filter (filter sock with end cap)
-
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface Preparation
Husqvarna DC3300 Primary Filter Sock
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface PreparationHusqvarna DC3300 Primary Filter Sock
- Replacement primary filter for Husqvarna DC 3300 Dust Collection System
- Filter sock design with end cap
- Designed to provide replacement filtration when needed
- Part of the Husqvarna replacement filter range
- DC 1400 options include a standard paper filter and a HEPA filter
- DC 5500 options include a primary filter (filter sock) and a secondary polyester filter/micro filter
- DC 3300 options include a primary filter (filter sock with end cap) and a secondary polyester filter/micro filter
-
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface Preparation
Husqvarna DC5500 Primary Filter Sock
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface PreparationHusqvarna DC5500 Primary Filter Sock
- Replacement primary filter for Husqvarna DC 5500 Dust Collection System
- Filter sock design
- Provides replacement filtration when needed
- Part of the Husqvarna replacement filter range
- DC 1400 options include a standard paper filter and a HEPA filter
- DC 5500 options include a primary filter (filter sock) and a secondary polyester filter/micro filter
- DC 3300 options include a primary filter (filter sock with end cap) and a secondary polyester filter/micro filter
-
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface Preparation
Husqvarna DC5500 Secondary Polyester Filter
Specialty Vacuums & Dust Collectors, Equipment & Instruments, Surface PreparationHusqvarna DC5500 Secondary Polyester Filter
- Replacement secondary filter for Husqvarna DC 5500 Dust Collector
- Also identified as a secondary polyester filter/micro filter
- Designed for replacement filtration in Husqvarna dust collection systems
- Made of polyester
- Part of the Husqvarna replacement filter range
