CNC Tools & Auto Edge
CNC Tools & Auto Edge Categories
Explore Brand PagesCNC Tools & Auto Edge
Showing 13–24 of 80 results
-
Core Bits and Finger Bits for CNC Machines
Weha RockPecker CNC Core Bits
- The RockPecker CNC core bits work excellent on all CNC machines such as Breton, Northwood, Park Industries, and other CNC machines.
- RockPecker CNC core bits have been built to core perfectly smooth, chip-free holes on all thickness materials.
- RockPecker CNC core bits have only a 1mm thick rim. These thin wall core bits will drill very clean and fast through the quartzite, quartz, granite, marble, and all materials.
- The RockPecker CNC core bits will drill hundreds of holes.
- RockPecker CNC core bits is one of the best CNC core bits that you can put on your CNC machine
-
Core Bits and Finger Bits for CNC Machines
Oma Dekton CNC Finger Bit
The Finger Bit System has produced a CNC Finger Bit specifically for Dekton, Porcelain, Ceramic, Sintered Stone materials. Twin 8 segment design with ½ gas connection made for all CNC machines.
- Twin 8 segment design with ½ gas connection made for all CNC machines.
- Designed for 400′- 450′ of life.
- The 50mm (5cm) Dekton Finger bit is designed for 4cm and 5cm (40mm and 50mm) material only due to the placement of the water slots. If using on 20mm (2cm) or 30mm (3cm) material, please purchase the 20mm or 30mm OMA Dekton Finger Bit
-
-
Core Bits and Finger Bits for CNC Machines
Oma CNC Finger Bit Green
Oma CNC Finger Bit Green is a modified 8 segment CNC finger bit for quartzite, granite, marble, quartz, engineered stone. Is designed to run between 14-25″ per minute between 5,500-8000 rpm, depending on the stone being used.
- The life will be excellent, the wear will be even, and the bit will provide an all-around, well-performing finger bit on practically all stone that is run through the CNC.
- The estimated life of the OMA CNC Finger Bit is outstanding. Running a mixture of quartz, granite, quartzite, marble, etc, you can expect between 100-130 sink cutouts when run at the below specifications.
- Typical life is between 550-750 Linear feet, with some bits lasting well over 1000 linear feet, depending on the rpm, feed rate, and materials
-
Core Bits and Finger Bits for CNC Machines
Weha Gas CNC Core Bit
The Gas CNC Core Bit is designed specifically to give unparalleled life, speed, and zero blowouts on CNC machines. Thin wall for fast, consistent drilling Total length: 4 ½” gas thread. Wet use only.
- Total length: 4″
- ½” gas thread
- Wet use only
-
Core Bits and Finger Bits for CNC Machines
Weha Top Racer High-Speed CNC Finger Bit
- The Weha Top Racer High-Speed Finger Bit is unbelievable on Granite, marble, and especially Engineered Stone, Quartz materials.
- The Faster you run the Top Racer, the better it performs!
- The Weha Top Racer high-speed CNC diamond finger bit is the fastest cutting CNC Finger Bit on the market! Designed for production work, the Top Racer can run up to 36″ per minute fully engaged!
- With its 8 segment design, the Top Racer Finger bit will remove material at an incredibly fast rate.
-
CNC Auto Edge Tools & C-Frame Tools, CNC Tools By Diamax
Cyclone Straight Edge Wheels White Resin
The Cyclone Straight Edge Wheels White Resin are specially designed to be used on white and light-colored materials without bleeding.
- Designed to be used on white and light-colored materials without bleeding
- Gives an exceptional and superior smooth finish in comparison to epoxy wheels
- 4″ Diameter Size
CAN BE USED ON
MATERIALS
USE
Auto Edge Machine Engineered Stone, Granite, Marble Wet Only -
CNC Auto Edge Tools & C-Frame Tools, CNC Tools By Diamax
Cyclone Snail Lock System
- Fits most auto-edge profile machines with a new formula which ensures even wear and longer life
- Best for bull-nose shaping & polishing
- Copper bonded position #3 ensures longer life compared to standard resin
- For RPM please consult your machine technical specs
-
-
CNC Auto Edge Tools & C-Frame Tools, CNC Tools By Diamax
Cyclone S Hybrid Wheels
- New and improved version
- Designed for straight & bullnose edges
- White resin to polish white quartz as well as granite
- New 15 mm thickness for Diamax’s longest-lasting auto edge wheel
- For use on all multi-head in-line polishing machines
-
CNC Auto Edge Tools & C-Frame Tools, CNC Tools By Diamax
Cyclone S Straight Edge Wheels
- Designed for straight edges
- Polish Granite, Marble, and engineered stone
- For use on all multi-head inline polishing machines and back-splash polishing machines
- Longest lasting Cyclone wheels
- Available in 5″ and 6″ diameter sizes
