Stain removers
Stain removers Categories
Explore Brand PagesStain removers
Showing 25–31 of 31 results
-
Stain removers
Bellinzoni Stone Rust Remover Mangiaruggine
-
Rust Remover – mangiaruggine (“RustEater”) is a gel product, especially formulated for the elimination of stains of rust on all lapideous materials. It can be safely used also on polished marbles, without ruining the shine. The RUSTEATER Gel acts quickly and it removes rust without effort.
-
-
Stain removers
Bellinzoni Stone Spot Remover Mangiamacchia
-
It removes oil, grease, coffee, ketchup spots and others. Apply a layer of 5 mm thickness. After 2/3 hours, once dry, remove using a brush. If necessary, repeat the application until complete removal of the spot. Keep in the original container. It is certified and guaranteed for foodstuff direct contact.
-
-
Adhesives by Stone and Other, Caulk and Sealants, Cleaners & Maintenance by Akemi and Others, Solvents, Stain removers
Lanco Acetone
Adhesives by Stone and Other, Caulk and Sealants, Cleaners & Maintenance by Akemi and Others, Solvents, Stain removersLanco Acetone
- Helps thin lacquer, polyester and nitrocellulose for easier an application
- Soluble in water, alcohol and many volatile oils.
- High performance liquid formula
- For indoor and outdoor use
- Biodegradable
- Low VOC
-
Stain removers
Miracle Liquid Poultice (part A + B)
- Stain Removing Absorbent Powder For: All Tile, All Natural Stone, Concrete, All Natural Stone, Masonry Surfaces, Clay Pavers.
- Poultice Powder is an easy to use, fine, non-acidic absorbent powder designed to work with different cleaners/chemicals to draw out most stains from most absorbent surface materials.
- Coverage will vary depending on density, porosity, texture, surface absorption, weather, time solution is left on the surface and application methods. Used as directed, Poultice Plus will clean
-
Stain removers
Miracle Sealants Poultice Plus Powder Mix
- Stain Removing Absorbent Powder For: All Tile, All Natural Stone, Clay Pavers, Concrete, Masonry Surfaces.
- Poultice Powder is an easy to use, fine, non-acidic absorbent powder designed to work with different cleaners/chemicals to draw out most stains from most absorbent surface materials.
- Coverage will vary depending on density, porosity, texture, surface absorption, weather, time solution is left on the surface and application methods. Used as directed, Poultice Plus will clean
-
Stain removers
StoneTech Oil Stain Remover
- Designed to remove deep, set-in oil-based stains without discoloring the surface
- The easy-to-use product leaves no residue behind
- Recommended surfaces include: marble, granite, limestone, travertine, slate, sandstone, grout for ceramic and porcelain tile, masonry, and concrete
- Approximate coverage is 1/2 to 1 square feet of surface at 1/4″ thickness
Product Update:
StoneTech Oil Stain Remover has been discontinued.
VMC Poultice is a suggested replacement option.
