Bridge Saw Blades by Diamax

Diamax has a very complete line of Bridge Saws, no matter if you are working with Granite, Engineered Stone, Quartzite, Marble, or Glass/Porcelain. Diamax product has been established as a very trustable source for the stone industry, with less than 1% return ratio and they have been around since 1996.

Even though their Blades are very versatile, in the following sections you will find the different options from you can choose, depending on the material you plan to cut.

These are the longest-lasting Quartzite blades on the market. All three choices can also be used on Granite, and the Cyclone S Quartzites can also be used on Engineered Stone. They are designed with a steel core for straight and miter cuts. They are available in diameter sizes from 14″ to 18″, and the Cyclone S Quartzite Silent Core Blade also in 20″. Below you will find the 3 different choices

Cyclone Marble Silent Core Blade is specially designed with a specific marble bond segment. Its silent core feature reduces noise significantly, and the segments contain a higher concentration of smaller grit diamonds to ensure chip-free clean cutting. The  Silent Core Reinforced Blade can also be used to cut Engineered Stone, Granite, and Quartzite, while the Cyclone Silent Core Blade can also be used on Engineered Stone and Granite. They are available in diameter sizes from 14″ to 20″. Below you will find the 3 different choices

Cyclone Ultra Silent Core Blade (V2) is specially designed for use on sintered stone and porcelain panels, with new bond and diamond concentration that make cuts fast and chip-free.

Among its main features, we find:

• Available in 14″ and 16″ diameter sizes.
• 10mm Segment,
• 50/60mm Arbor
• 2,200 maximum RPM for the 14″ variation and 2,000 for the 16″ one
• It can be used to cut:
  • Dekton
  • Glass
  • Ultra-Compact
  • Porcelain/Tile

Cyclone Low HP Silent Core Blade is specially designed for the Blue Ripper, Achilles TSA, or any portable track saw device, sporting Silent Core for Noise Reduction. Cuts super hard material easily. Its special soft bond cuts super hard material with ease.

Among its main features, we find:

• First-ever low horsepower (LH) blade designed with a silent core
• Designed for the Achilles, Blue Ripper, TSA or any portable track saw device
• Special soft bond cuts super hard material with ease
• Available in 14″ and 16″ diameter sizes, both with 10mm & 15mm segment size option
• It can be used to cut:
  • Engineered Stone
  • Quartzite
  • Granite

The Diamax Bridge Saw Blades are very versatile, and most of them will work perfectly for cutting Granite and Engineered Stones. In the following table, there is a summary of all the Blades showing the material for which they are recommended. You can click on any of the images to go directly to the blade. The considered material, in order, are: Granite, Engineered Stone, Quartzite, Marble, and Porcelain/Glass.