Weha
Weha Categories
Weha
Showing 25–36 of 319 results
-
Bridge Saw Blades by Weha
Weha White Lion Quartzite Bridge Saw Blade
- 60mm Arbor, 20mm Segment.
- The White Lion Bridge Saw blade bond was made specifically for cutting Quartzite stone. Granite and Engineered Stone will be cut at even a faster speed than other granite bridge saw blades.
- ARIX Layered diamond Technology for continuous diamond contact to the stone and maximum diamond concentration for as long of a life as possible when cutting Quartzite, granite, and engineered stone
- Depending on the Quartzite, Cutting speed with the White Lion Bridge Saw blade will be in the 5-10 ft per minute range for cutting Quartzite. It is always best to watch the amps on the saw to see the best cutting speed when cutting quartzite.
-
Bridge Saw Blades by Weha
Weha Matrix SJ SawJet Bridge Saw Blade
Weha Matrix SJ SawJet Bridge Saw Blade is a premium diagonal layered diamond blade designed to cut fast Quartzite, engineered stone, quartz materials. Also great on marbles.
- Because of the continuous layer of diagonal diamonds, the Weha Matrix SJ will last as long as 20-25mm height blades.
- This unique layered diamond is performing like no other blade on the market.
- Super quiet. Outstanding life.
-
Bridge Saw Blades by Weha
Weha Low Horse Power Bridge Saw Blade
- The Weha Low Horse Power Diamond Saw Blade has a total outside diameter of 13 ⅞”.
- This diameter allows it to fit on the Blue Ripper rail saw and inside other saws with a 14″ blade housing.
- This blade is excellent for the Achilli TSA 3 HP Portable Track Saw.
- 60mm arbor
- 10mm segment
-
-
Bridge Saw Blades by Weha
Weha Red Cat Bridge Saw Blade
- This silent core bridge saw blade is great for doing 45-degree miters as well with no deflecting.
- Red Cat is made to run steady tried and true cutting. If your saw has auto settings, set the saw to monitor amps and let it cut.
- The Red Cat is built with 15mm height tapered segments that are made to be an open cutting segment with plenty of water to keep it sharp and cutting clean and consistent.
- Red Cat will cut clean with very little chatter or chipping and will cut all the way to the core to get the maximum life out of the blade.
- The Red Cat blade is made for shops that want a good blade at the best price possible.
-
Turbo Blades by Weha
Weha Quartz Turbo Blades
The Quartz Turbo Blades was made specifically for cutting very hard materials such as Engineered Stone, Quartz, and Quartzite. Made with a very high diamond content and a bond to keep sharp, the Weha Quartz blade will cut fast and clean anything that comes through the shop.
- Can be used wet or dry in all materials.
- ⅞” – 20-5/8″ 4 pin quad hole.
- 6″ x 10mm Quartz and QuartziteTurbo Blade.
-
Turbo Blades by Weha
Weha Ceramica Mesh Blade
- The special Weha turbo design will remove the material rapidly and cleanly and providing maximum air to keep the blades as cool as possible when used dry, which produces a super clean cut with absolutely minimal chipping.
- Because the blade is only 1.2mm thick, the blade cuts ceramic, porcelain, granite, Engineered Stone, Quartzite cleaner than any other turbo blade on the market.
- Dry use. May be used wet.
- ⅞” – ⅝”
-
Turbo Blades by Weha
Weha Blitz Ultra Premium Quad Turbo Blades
- Based upon real-life fabricator feedback, life expectancy is between 100-130 linear feet of cut. This includes both shop and installs use.
- It will leave the stone as smooth as a baby’s bottom!
- Designed with air cool holes to stay cool for continuous cutting.
- The Blitz blade comes with a solid stiff core that will not deflect, bend, or flex during the cut.
- Dry use may be used wet.
-
Turbo Blades by Weha
Weha Red Cat Turbo Blades
The Red Cat Turbo Blades are one of the best granite, Quartz, and Engineered Stone blades for the price. A tight narrow turbo diamond segments allow clean, fast cuts and a lot of life.
- The Red Cat quartz blades are going to cut fast, sinking into the stone with ease. The simple weight of the grinder is enough to make them cut through granite and quartz stone easily.
- A full 8mm of diamond and tight narrow turbo diamond segments allow clean, fast cuts and a lot of life.
- Weha Red Cat Diamond comes with an arbor and 4 Quad Holes for flush cutting using Quad Adapters. The Red Cat granite turbo blades can be used wet or dry in all materials.
