Weha Brand Page
Explore More Weha Products
Visit the full Weha collection and browse more related products.
Oma
Showing 1–15 of 58 results
-
Stone Routers by Weha
Oma CP99 Routing Machine
- 60% more horsepower than electric units
- Works on Granite, Marble, Engineered Stone, Quartz, and Quartzite Counter Tops.
- With aircraft Aluminum and stainless steel construction with fiberglass covers(not plastic), the CP99 is a router that will provide many many years of fabrication work.
- Weighing 35 lbs., this compact and lightweight router makes it easier to use, less user fatigue, and easy to move from one work table to another.
-
Stone Routers by Weha
Oma Antarex Bowl Cutting Machine
- The Oma Antarex bowl cutting router runs at a solid 4 HP, stronger than the most popular radial arm machines.
- The Antarex can cut out any size hole as well as any countertop shape configuration at any length. If you can template it, the Oma Antarex bowl cutter can cut it out.
- Built with aircraft Aluminum and stainless steel construction with fiberglass covers (not plastic) the Oma Antarex is a router that will provide many many years of fabrication work.
- The Antarex rides on16 nylon rollers supported by spheres of stainless steel. This can easily sit on top of the template.
- This compact and lightweight bowl cutter make it easier to use, has less user fatigue, and is easy to move from one workstation to another.
- Comes with an Extra Complete Spindle Assembly.
- Powered by the Oma 4 HP hydraulic power unit which provides power by means of hydraulic fluid to the router.
-
Stone Routers by Weha
Oma Engine Hydraulic Pump 3-Phase
This Hydraulic Pump 3-Phase is the engine behind the Hydraulic CP99 Router, Antarex Bowl Cutting router, Galaxy Hand Saw, and Vega grinder.
- 4 HP motor.
- 220 volt 3 phase wiring.
- Works 24 hours a day for continuous productivity.
- Includes the hoses needed to connect to the Oma machines.
-
Stone Routers by Weha
Oma Hydraulic Workstation
Oma Hydraulic Workstation is the perfect solution for cutting out bowls, profiling and polishing edges, and keeping it all organized and space-saving.
- It takes up a very small footprint in a shop. In fact, it can be used in a standard work table space.
- The OMA stands are made specifically for the OMA CP99 Router and Antarex Bowl Cutter. This makes storing the routers safer by not having them take up shelf space and makes them much easier to manage the hoses around the work tables.
- The newly updated double connection Hydraulic pump allows connection of both machines with a simple switch to use either machine. This makes for a faster workflow without having to disconnect and connect machines.
-
Core Bits and Finger Bits for CNC Machines
Oma Dekton CNC Finger Bit
The Finger Bit System has produced a CNC Finger Bit specifically for Dekton, Porcelain, Ceramic, Sintered Stone materials. Twin 8 segment design with ½ gas connection made for all CNC machines.
- Twin 8 segment design with ½ gas connection made for all CNC machines.
- Designed for 400′- 450′ of life.
- The 50mm (5cm) Dekton Finger bit is designed for 4cm and 5cm (40mm and 50mm) material only due to the placement of the water slots. If using on 20mm (2cm) or 30mm (3cm) material, please purchase the 20mm or 30mm OMA Dekton Finger Bit
-
Core Bits and Finger Bits for CNC Machines
Oma CNC Finger Bit Green
Oma CNC Finger Bit Green is a modified 8 segment CNC finger bit for quartzite, granite, marble, quartz, engineered stone. Is designed to run between 14-25″ per minute between 5,500-8000 rpm, depending on the stone being used.
- The life will be excellent, the wear will be even, and the bit will provide an all-around, well-performing finger bit on practically all stone that is run through the CNC.
- The estimated life of the OMA CNC Finger Bit is outstanding. Running a mixture of quartz, granite, quartzite, marble, etc, you can expect between 100-130 sink cutouts when run at the below specifications.
- Typical life is between 550-750 Linear feet, with some bits lasting well over 1000 linear feet, depending on the rpm, feed rate, and materials
-
OMA Router Bits by Weha
Oma Demi Bullnose B20 Prodiam Cont Metal Pos 2
The Demi Bullnose B20 Prodiam Cont Metal Pos 2 are diamond brazed technology bits that work excellent on marble, limestone, travertine.
- Oma Bits are produced in Italy with OMA controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stones.
-
OMA Router Bits by Weha
Oma Demi Bullnose B20 Extradiam Pos 3
- The Critical bit between the profile and polishing phase of the Oma system of bits.
- The first bit without a bearing to fully engage the stone in the polishing process.
- An optimum bit before starting the Oma polishing wheels or start with hand polishing.
- The recommended RPM is between 2,500-3,500 yet the optimum RPM is at 3,000.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Demi Bullnose B20 Truelife
- The Demi Bullnose B20 Truelife, by its design, will not explode or break apart like the rubber diamond strips that are on the market today.
- Designed for granite, marble, limestone, quartz, engineered stone, etc, the Oma True Life can be used on all kinds of stone.
- Recommended Polishing Speed: 2500-6500 RPM. Optimum results at 3000 RPM.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that Oma routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
-
OMA Router Bits by Weha
Oma Demi Bullnose B20 Replacement Segments
- Oma bits offer center water feed so that there is always continuous water on the bits to guarantee no accidental “dry cut” and affecting the bit or the stone.
- Oma bits do not receive thermic stress from the welding process, as other Pos 1 bits have to go through. This guarantees a very long life, even wear, and a very smooth finish.
- Although segmented, Oma pos 1 bits will always leave the stone smooth, chip-free, and ready for pos 2 profile bits or hand polishing.
- Due to the quality and longevity of these position 1 bits, you will find savings between 30%-50% over a 1 year period compared to the current smaller diameter cont rim bits that are on the market now.
- Oma Bits are produced in Italy with Oma controlling 100% of the quality of production. This Guarantees that every bit will meet the standards that OMA routers need to be at 100% optimum performance. No outside third party to meet Oma standards.
