Groves Tables, Clamps & Lifting Equipment
Explore Groves tables, stands and clamps for fabrication, plus slings, forklift booms and spreader beams for lifting. Compare work surfaces, mobility and material compatibility, then review each model’s dimensions, load rating and required configuration before selecting equipment.
Here you will find:
- Fabrication Tables, Stands & Clamps: Compare Groves tables, fabrication stands and the Miter Up system by work surface and support arrangement.
- Stone Slings, Glass Slings, Booms & Beams: Compare lifting products by material and equipment compatibility.
Groves Tables, Stands & Clamps
Compare Groves tables, fabrication stands and the Miter Up system by work surface and support arrangement. Stationary and mobile Groves tables suit different shop layouts; stands and cut-out supports help with more specific operations. Match the support arrangement to the piece, and check whether the selected product includes wheels or is intended to remain in place. Product photos may show configurations or accessories that need to be confirmed in the listing.
-
Work Tables by Groves Incorporated
GROVES Fabrication Table
- Heavy-duty powder coated finish.
- Two built-in end clamps can hold multiple tables together in any configuration.
- Rivited, steel-impregnated rubber is mounted to the top of the table to protect material during fabrication.
- Includes (4) heavy-duty 5″ diameter swivel casters & (4) operated foot-locks.
- 600 lbs capacity
- 60″ Long x 25″ Wide x 42″ High
- 176 Lbs
-
Work Tables by Groves Incorporated
GROVES Heavy Duty Freestanding Fabrication Table
- Heavy-duty powder coated finish.
- Riveted, steel-impregnated rubber is mounted to the top of the table to protect material during fabrication.
- Made of .16 mm 6GA steel gauge
- Available in a mobile or fixed design.
- Freestanding units come with four legs that have leveling feet.
- Includes (4) legs that have leveling feet that are adjustable up to 1″.
- 600 lbscapacity
-
Work Tables by Groves Incorporated
GROVES Heavy Duty Mobile Fabrication Table
- Heavy-duty powder coated finish.
- Riveted, steel-impregnated rubber is mounted to the top of the table to protect material during fabrication.
- Made of .16 mm 6GA steel gauge
- Available in a mobile or fixed design.
- Includes (4) 5″ swivel caster and (4) operated foot-locks that are adjustable up to 1″ to level on uneven floor.
- Rugged steel table designed to aid in preparing and fabricating your materials.
- 84″ Long x 24″ Wide x 43″ High
-
-
Work Tables by Groves Incorporated
GROVES Glass Cutting Table
- Gray powder coat finish.
- Plywood will be mounted to the top and bottom shelf.
- The shelf height is 16″ from the floor.
- Ships are knocked down for freight savings and can be assembled in 20 minutes.
- Two rigid and two swivel brake 5″ casters.
-
A Frames and Racks by Groves Incorporated
GROVES Fabrication Stand
- Heavy-duty powder-coated finish.
- Height adjustable from 36″ to 42″.
- Collapsable for easy transport and storage.
- Rubber-mounted on top prevents sliding and scratches.
- Maximum weight capacity 500 lbs. with top bar fully retracted / 300 lbs. top bar fully extended.
-
Clamps and Seam Setters by Groves and Others
GROVES Miter Up Clamp
- Made of heavy-duty aluminum
- Cuts labor costs by speeding up the mitering process.
- The number of included L-Clamps varies depending on the unit size of the kit.
- Engineered to create fine miter positions and miter joints on natural & cultured stone
- Reduces material breakage & back strain
- Depending on unit size L-Clamps vary
- 6′ – 10′
Brands Carousel
Groves DT2560 Fabrication Table Assembly
Watch Groves DT2560 Fabrication Table Assembly from Groves Incorporated. Review the instructions for the exact model and configuration before assembly or use.
Stone Slings, Glass Slings, Booms & Beams
Compare the four Groves lifting product families together. Slings contact or support the material, while booms and spreader beams connect into specific handling arrangements. Check the intended material, dimensions, attachment requirements and included components on the selected listing. Use the manufacturer’s instructions to determine the permitted setup. Never infer compatibility solely from similar product names or photographs.
-
Stone Lifters by Groves Incorporated
GROVES Stone Sling
GROVES Stone Sling contains one pair of 3″ wide x 102″ long for lifting stone up to 80″ high when using the SSB-96 Spreader Beam. Two-ply slings with full length pads sewn on the inside of body for wear protection.
- 16,300 lb. vertical load capacity per sling
- Dimensions: 3″ x 102″ Endless loop
- Weight: 30 lbs
-
Stone Lifters by Groves Incorporated, Stone Lifters
GROVES Glass Slings
- Made with 3″ wide polyester webbing and includes side straps to help achieve a balanced load.
- The inside of slings and horizontal straps are covered with reinforced PVC-coated material to help prevent cutting.
- Velcro straps prevent slings from shifting on the beam when not under load.
- Check slings for wear and damage before each use.
- Workloads are rated at 9,600 lbs. per pair in a vertical lift.
- Slings should always be nested in the same corresponding sling stop on top of the beams.
- Always use included pins to secure the sling inside sling stops.
-
Stone Lifters by Groves Incorporated
GROVES Fork Lift Boom
- When fully extended, the boom has a reach of 98″.
- Boom is designed for use on 2 & 2.5 ton fork lift trucks.
- The boom’s telescopic boom offers versatility with maximum operator visibility.
- When fully extended the boom has a reach of 98″
- Boom extension design prevents the complete pullout of the boom extenstion.
- Capacities: Fully retracted 3,306 lbs. Fully extended 1,102 lbs.
-
Stone Lifters by Groves Incorporated
GROVES Stone Spreader Beam SSB-96
- Designed for safety and convenient operating.
- For use with Slings up to 4″ Wide.
- Lifts with overhead Crane or Forklift.
- Removable pins on top of the beams hold slings in place for safety.
- 10,000 lb capacity
- Dimensions: 96″ Long x 5″ Wide x 5″
- HighWeight: 198 lbs
Brands Carousel
Groves Equipment for Stone & Glass Professionals
- Storage and transport: Compare racks, A-frames, carts and dollies for shop organization and material movement.
- Fabrication and lifting: Explore Groves tables, clamps, slings, forklift booms and spreader beams by task and equipment requirements.
- Replacement parts: Find compatible rails, posts, caster kits, protective rubber and straps using the equipment model and part specifications.
Choosing Groves Tables
Choose Groves tables by work height, usable surface and the position of the support points. Check whether a fixed or mobile setup fits the operation and the space around the workpiece. For a tilt table cart, review the handling procedure and the limits for each position. For clamps, identify the joint or operation being performed. Do not treat a clamp rating, stand rating or caster rating as the capacity of an entire combined setup.
Review the selected model’s dimensions, configuration, load rating and package contents on its product page. For help identifying equipment or a replacement component, contact USA Granite Tools with your model number and application details.
Groves Tables – FAQs
Find answers about Groves Tables, product selection and compatible equipment.
Stationary Groves tables provide a fixed work surface. Mobile versions include a wheel arrangement for their intended movement. Compare the exact configuration, operating instructions and rated load before choosing.
The table and Miter Up Clamp are separate product families. Check each listing’s included components. Do not assume that a clamp or accessory shown nearby in a photograph is supplied with the table.
Choose the table for the material and operation specified by the manufacturer. Support surface, dimensions and load requirements can differ between glass cutting and stone fabrication.
Find replacements for Groves tables in Parts & Accessories and compare the part’s listed compatibility with your table or stand model. For example, replacement top materials are model-specific; identify your equipment before ordering.
Send the operation, material dimensions and weight, available workspace and any model numbers already in use. For a clamp question, include the joint type and the configuration you need.
They are separate product families intended for particular materials and handling requirements. Review the exact sling specification and manufacturer instructions for the material and lifting arrangement.
No. The complete setup must satisfy the limits and compatibility requirements of every applicable component and the lifting equipment. Use the rating for the specified configuration.
For manufacturer information, visit the official Groves Glass & Stone catalog.